II. Incoming Inspection
Kooltrays are designed, built, and packaged to withstand the shock and vibration associated with shipment by
common carriers. Occasionally improper handling during shipping causes damage. Therefore, a thorough
inspection should be performed upon receipt of all shipments. Any carton tears, dents, scratches, or loose
articles should be noted on the Freight Bill. Cartons should be opened promptly and the units inspected for
CONCEALED DAMAGE. An immediate claim MUST be filed with the freight carrier and an inspection
requested. Retain all packing materials. Kooltronic cannot assume responsibility for Consignee’s failure to
file a timely freight claim.
III. Product Handling
I
Do not attempt to operate your Kooltray until you read and thoroughly understand this Manual.
I
Before operating this unit, all electrical wiring must be checked to assure the proper connections.
IV. Product Identification Nameplate
V. Installation Instructions
3
CAUTION
Operate this unit only on the proper voltages and frequencies as noted on the
nameplate.
Each Kooltray includes a nameplate. This nameplate provides:
Kooltrays are designed to be rack mounted and are provided with the necessary means to be fastened to rails.
Refer to page 5 for location of mounting holes.
➀
Model Number
➁
Electrical Power Characteristics
➂
Date of Manufacture
We recommend you copy this information from your
unit.
➀
When ordering parts, specify
the Model Number.
➁
Before operating, be sure
that the power source
matches these requirements.
K2T2X100
230V 50/60HZ
11/07
➀
➁
➂
