The
appliance
must
be
correctly
connected
to
the
power
supply,
115V/60Hz,
and
grounded.
CARE AND MAINTENANCE
The unit should be cleaned on a regular basis. (See: “HOW TO CLEAN”)
It is necessary to have an adequate ventilation space around the unit in order to attain
proper performance, dissipation of heat, maintain efficiency, and low power consumption.
Clearance of minimum 2 inches should be maintained at the rear and sides of the unit.
And
especially do not obstruct the front hot air outlet frame.
(See: “HOW TO INSTALL”)
Do not modify the power cord under any circumstance to allow the unit to be plugged into a
non-grounded outlet. To avoid heat damage to the power cord, please ensure that it does not
come in proximity or in direct contact with the compressor of the unit.
Please avoid installing the unit in a location where the appliance will come in contact with
water or moisture to minimize rusting of metal parts.
The unit should not be installed near any heat source or in a location where it will come in
direct contact with the sunlight.
The components, if need to be replaced, should be replaced with like components, and
should be replaced by the manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard and to minimize the risk of possible ignition and also to decrease the
cooling performance due to incorrect parts or improper service.
The unit is not designed to be installed in an outside area such as a garage or a
porch. Ambient temperatures of below 50°F or above 90°F will hinder the
performance of the appliance.
9
Summary of Contents for Undercounter KM-BIR3C-GD
Page 11: ...HANDLE INSTALLATION GUIDE 10 ...
