Page 11
MAINTENANCE
Before cleaning, turn the appliance off, and disconnect from
the mains supply. The appliance may then be cleaned using a
damp cloth with a drop of washing-up liquid to remove any
dust or dirt from the case. Do no use stronger detergents or
solvents as these may damage the plastic.
Cleaning the filter:
The filter is located on the back panel of the appliance. Unclip
to remove, then remove dust and dirt using a vacuum cleaner.
The filter should be cleaned every two weeks to maintain
optimum performance.
Using a dry 1" (25mm) paint-brush, remove any dust from the
grilles.
If the mains lead is damaged, it must be replaced by the
manufacturer or an authorised service centre. If the mains plug
needs to be replaced, proceed as follows:
Connect the brown wire to the terminal labelled "L".
Connect the blue wire to the terminal labelled "N".
Connect the green/yellow wire to the terminal labelled with
the earth symbol or "E".
Make sure that the cord-grip is positioned correctly (over
the outer sheath of the cable) and it fully tightened.
