SECURING THE QUICK RELEASE (Q/R) REAR WHEELS-
X
O
M.
D
FIG.7 & 8
Insert the wheel axle into the side opening
of the main frame
Clamp down the Q/R lever down by moving the lever 180 degrees to secure the wheel
in place. The Q/R handle should face to the rear and parallel to the ground. This will
prevent the Q/R lever from snagging a stationary object.
!
!
See page 4 for special instruction on adjusting the rear wheel Q/R tension.
Rear wheels have a 5 degree camber for better stability and tracking.
NOTE:
SECURING THE FRONT WHEEL
XX
Q
D
ADJUSTING FRONT WHEEL Q/R AXLE
AA
T
D
D
(FIG.9)
Insert the wheel axle
into both fork ends
.
Clamp down the wheel axle to the fork ends by moving the
clamping lever 180 degrees inward to secure the wheel in
place.
You may need to adjust the clamping tension on the wheel
to
secure it in place. Hold adjusting nut and turn clamping lever
clockwise a few turns and clamp lever down to check tension.
Repeat if necessary or back tension off by reversing tensioning
procedure.
!
!
