10
Figure 17 illustrating the return to reservoir manifold section connected to the reservoir via a removable return to reserve pipe. A
2
nd
90
0
return to bucket pipe (not shown) is included to use when draining the reservoir into a bucket during nutrient solution
change out (Hint: fertilize potted plants and flowers with used nutrient solution).
Locate and install the irrigation system (Figure 18). Components include the support bar
(horizontal PVC), connection system to the pump and filter system inside the reservoir (vertical
section), irrigation tube (1/2” rubber tube), nutrient solution manifold, and five spaghetti
distribution tubes, one to each GroPipe. Everything is preassembled. Insert the irrigation support
bar’s vertical pipes into the middle tees on N and S end’s top bars. The irrigation manifold goes to
the S end. The vertical connection system to the reservoir is flexible and swivels to assure easy
access into the Reservoir through a small 1” hole. The short rubber tube section is glued into the
white plastic connector but is not glued with the grey plastic 90
0
connecting elbow. If you find a
leak here, simply tighten the small pipe clamp.
Summary of Contents for My Garden
Page 21: ...21 ...
