•This product requires adult assembly. Please set aside at least 40
minutes for assembly. Children can be harmed by small parts, sharp
edges and sharp points in the product’s unassembled state.
•Please identify all parts before assembly and save all packaging
material until assembly is complete to ensure that no parts are discarded.
•Assembly tool for need: screwdriver (not included), pliers (not included),
hammer (not included).
Assembly steps
1.
Install the front gu
ard
Install the front guard into the positioning
ring first, and then fix it by 6 4*10flat head
screws.
2. Install the front wheel
Remove the nut and gasket from the front
axle and install the front wheel (notice:
there is difference between front wheel
and driving wheel),
3.
Install the motor and rear wheel
Insert the rear d-axis into the body of the
product (notice: insert the rear axle to the
left and right). Connect the drive motor
to
the rear axle
and connect the wire,
install
the rear wheel
(notice: there is difference
left rear wheel
and right rear wheel), place
in gasket and
lock with M8 nut.
5