BAKL30T12AD
Edition: 28.02.2017
Page: 8/14
5.2.
Switch on air conditioning unit
By pressing key
Blowers Plus (1)
the A/C is switched on.
Press
After switching on the controller carries out a self-test. The software version
(here: 1.0) as well as the operating mode (here: A) are indicated for approx. 3
sec.
After this the operating hours of the A/C unit are displayed for
approx. 3 sec.
The operating hours are indicated as figure until the thousands digit.
For every ten thousand digit a bar is displayed additionally (for 20000
e.g. two bars, here: 20286 hours).
Now the A/C is ready for operation. The last stored setting is displayed.
5.3.
Switch off air conditioning unit
By pressing the key
Blowers Minus
(2) longer than 2 seconds the A/C is
switched off.
While the key is pressed the display changes temporarily. This is no
fault, no settings are changed.
Press and hold
Now the A/C is switched off.
5.4.
Setting of the desired temperature
The set temperature is displayed (here: 22° C). Digits 1 to 3 show the set tem-
perature, the last digit the unit °Celsius or °Fahrenheit.
Adjustment of the set temperature with key
Set Temperature Plus
(8).
Press twice
The new set temperature is indicated, here 24°C.
By pressing the key
Set Temperature Minus (7)
the temperature can
be decreased.
