DMX 512 CONTROLLER SERIES
12
Running of scanner chases
1 Press[EDIT/RUN], to have the corresponding LED on.
2 Press number keys P1-P12
to select the chase number, and make it run; if that chase has
not been edited, then the corresponding LED will not be on When that key number is pressed.
3 Ajust [SPEED] and [CROSS] potentiometers, to change the inter-chase pause time and chase
cross speed. If the [SPEED] or [CROSS] potentiometer is in the bottom AUTO area, then the
chase pause time and chase cross time that had already been edited will be run.
Press[+ ] to memorize this chase effect, and enter the next step of editing. Press[ -],can
view the last chase, repeat modification in steps 4,5,6 and 7, and press[+
] again to store it).
Repeat steps 4 to 8, to edit other chases(chase steps).
Press [EDIT/RUN] to have the corresponding indicating light on; memorize it and then
quit the editing state, to enter the running state.
Repeat steps 2 to 10, to edit other chases.
8
9
10
11
11
The editing of scanner chase
1 Press [BLACK] to turn off the LED.
2 Press [EDIT/RUN] to turn on the LED, and enter the program state.
3 Press any one of the number keys P1-P12 once, to select the chase number to be edited,
which is shown in Chase[ ] on the LCD.
4 Then press numbers (P1-P20 , to select the controlled scanner, and its corresponding LED
will be on. If the corresponding indicating light is not on, then that scanner has been selected,
so it will not be affect by step 5.
5 Slide (CH1-CH8 to adjust the corresponding channel data of the scanner, or press [SA/SB/SC]
and slide (CH9-CH24) to call out the corresponding scanner effect(if you have set X and Y
direction scanning channel transfer, then two direct sliding potentiometer sliders will not
function. You can control the bottom right rocker potentiometer to get the data).
6 Repeat steps 4, and 5 to adjust other scanners, so that the needed scanner chase can reach the
predefined effect.
7 Slide[SPEED] and [CROSS] potentiometers to adjust the chase pause time and chase cross time.
MANUAL
[??]
O O O O O O O O A
or O O O O O O O O B
or O O O O O O O OC
Set
X-Y
X
[ ]
Y
[ ]
When just entering the editing state, press[SET X/Y] will show the prompt
on the left.X:[ ] Y:[ ] In the space, the channel number to be transferred to the
rocker control can be input by pressing P1-P8 or pressing [SHIFT]+(PCH9-
PCH16), and you can also press[DELETE], to cancel the set transfer chananel
In the state of running the chase, pressing [MANUAL] will show the
prompt on the left.The [??] in the upper line shows the chase number
that is running, and the bottom lines shows whether the 1-24 channels
(channels 1-8 are identified with suffix A, and channels 9-16 are
identified with suffix B,
)
are released. Here, F indicates the corresponding channel is
,
and O indicates it is manual. Press P1-P20 again with select
one or more scanners to conduct the manual operation of the manual
channels.Press [MANUAL] again, will quit the mixed control of manual
+ automatic,and then carry out the automatic program.
and channels 17-24 are identified with suffix C
automatic
10/12
USER MANUAL
