10
KON SOBEK Drives GmbH · Etzwiesenstraße 35/1 · D- 72108 Rottenburg am Neckar
Tel: +49 (0) 7457/9435-0 · Hotline: 0800-Brushless · Fax: +49 (0) 7457/9435-90 ·
E-Mail: [email protected]
Index:
1.
General
10
2.
Safety Notes
10
3.
Connecting the ProgUNIT to an ESC
10
4. Updates
10
4.1
Updating an ESC
10
4.2
Updating the ProgUNIT
11
5.
PC Program K-KONFIG
12
6.
Warranty
15
7. Service, Technical Support, Hotline
15
8.
Recycling
15
1. General
Thank you for choosing a KONTRONIK ProgUNIT
With the ProgUNIT you have a device to programm
and update all online updatable KONTRONIK ESCs.
2. Safety Notes
You must not connect the ProgUNIT to the main
electrical supply.
Danger of one's Life!
The ProgUNIT isued exclusively for configuring
KONTRONIK ESCs. ESCs made by other
manufacturers cannot be configurated via the
ProgUNIT.
The ProgUNIT cannot be used as an ESC.
Operation of a model with the ProgUNIT is not
allowed.
Operation of the ProgUNIT is only allowed in
situations in which no harm to others can occur.
The ProgUNIT can only be used in environments in
which no discharge of static electricity occurs.
Under no circumstances the ProgUNIT should be
opened or modified.
Do not throw the ProgUNIT into open fire.
While connecting the ESC to a battery pack ensure
the correct polarity of the connectors!
3. Connecting the ProgUNIT to an ESC
Connect
the
KONTRONIK
ProgUNIT
to
the
KONTRONIK ESC via the BEC cable (Master port)
and the
female plug
on the ProgUNIT.
After connecting the ProgUNIT with an ESC, power up
the ESC by connecting a charged battery to the ESC.
Without powering up adjustments to the ESC cannot
be made.
If the BEC of the ESC is deactivated, please connect
a 4 cell Ni-XX battery to male plug of the ProgUNIT.
4. Updates
4.1 Updating an ESC
For the implementation of an update are required:
Online updatable KONTRONIK ESC
KONTRONIK ProgUNIT
PC with Windows ™ operating system
Internet connection
Battery
1. Disconnect the KONTRONIK ESC from the
receiver (Master and Slave Port) and connect the
Master Port with the female connector of the
ProgUNIT.
2. Download from the KONTRONIK homepage
(www.kontronik.com) the latest software version
for your KONTRONIK ESC.
3. Connect the KONTRONIK ESC to an appropriate
battery. As soon as the connection is established
the LEDs of the KONTRONIK ESC and the
ProgUNIT starts flashing.
4. Launch the downloaded software version on your
Windows™ PC.
!
