SmartClient-SLUx-170-P - User Guide, Rev. 1.0
// 26
1
Base mounting bracket
2
Hooked mounting bracket with a hand-screw knob
To mount the SmartClient-SLUx-170-P please proceed according to the steps described:
1.
Prepare the mounting surface with sufficient screws (six screws for base mounting bracket) and if necessary
anchors corresponding to the mounting surface type if no screw holes are available.
2.
Secure the base mounting bracket to the mounting surface with screws (Figure 8).
Figure 8: Secure the base mounting bracket
3.
Secure the hooked mounting bracket onto the rear side of the SmartClient-SLUx-170-P (Figure 9).
Figure 9: Secure the hooked mounting bracket onto the SmartClient-SLUx-170-P
2
1
