SmartClient-SLUx-170-P - User Guide, Rev. 1.0
// 19
the baseboard. The unit is only completely disconnected from the DC mains, when the power
is removed.
3.2.3.
HDMI 2.0
The SmartClient-SLUx-170-P provides one HDMI 2.0 connector. One external (digital) display can be connected to this
HDMI 2.0 connector.
3.2.4.
DP
The SmartClient-SLUx-170-P provides one DP connector. One external (digital) display can be connected to this DP
connector.
3.2.5.
Line-In
The Line-in jack is designed to take input from a higher-powered sound source.
3.2.6.
Line-Out
The stereo headphone jack is used to connect the system’s audio out signal to amplified speakers or headphones.
3.2.7.
Mic-In
The microphone jack is designed to connect the microphone used for video conferencing, voice narrations, or simple
audio recordings.
3.2.8.
GbE
These connectors are Gigabit Ethernet 10/100/1000 Mbit/s, IEEE 1588 capable interfaces. The connectors are
standard 8-pin RJ45 type connectors with status LEDs:
Figure 2: Ethernet LED Status
3.2.9.
USB 3.0
The SmartClient-SLUx-170-P provides four USB 3.0 / 2.0 interface. These connectors allow connection of USB 3.0 or
USB 2.0 compatible device to the system.
LED satatus:
Orange - 1000 Mbit/s link established
Green - 100 Mbit/s link established
Off - 10 Mbit/s link established
LED satatus:
Off - Link is down
Flashing Green - Link is up and active
Steady Green - Link is up, no activity
