SMARC-sAMX7 User Guide. Rev. 1.9
// 13
Main characteristics of the SMARC-sAMX7 are:
Single/Dual Cortex A7-Core based on NXP’s processor i.MX7 Solo with 800
MHz and 2
W max power or i.MX7
Dual with 1000
MHz and 4
W max power
Up to 2
GB DDR3L memory down
2 to 64
GB pSLC eMMC (optionally)
2 to 32 MB QSPI boot flash
LVDS dual channel graphics
MIPI CSI camera interface
2x USB 2.0 On the Go (OTG)
4x USB 2.0 Host interface
2x SPI (1x SPI, 1x QSPI/ESPI) both with 2 chip selects
2x Ethernet (Solo processor 1x Ethernet)
Dual only: 1x PCIe, optional 3x PCIe via bridge
12x GPIOs
4x UART, with 32 bit FIFO
2x CAN Bus interface
Support for audio and common features (SPI, I2C)
APPROTECT (security chip) support on request, more information under
https://www.kontron.de/products/solutions/security/approtect.html
2.2.
Product Variants and Accessories
Following variants are planned:
Table 1: Product Variants of SMARC-sAMX7
Board
Description
Product Number
SMARC-sAMX7 Solo
SMARC-sAMX7 Solo with 1 GB DDR3L, 4 GB
pSLC eMMC, 2 MB SPI boot flash
51009-0104-08-1
SMARC-sAMX7 Dual
SMARC-sAMX7 Dual with 2 GB DDR3L, 8 GB
pSLC eMMC, 2 MB SPI boot flash
51009-0208-10-2
Following accessories are available:
SMARC 2.0 Evaluation Carrier
SMARC Starter Kit
