Kontron P3S440BX Technical Reference Manual Download Page 85

Page: 85 / 120

PCI-946-1 and P3S440BX Technical Reference manual

4-20

4.3.4.2

Updating the Flash BIOS

If you select one of the

Update

options from the main menu, a screen similar to the

following is displayed:

You are currently using

You are currently using::::

TEK1005

MAIN BIOS VERSION: 0.0.1

Current directory is:

C:\\\\

Searching for file:

*.bin

File Number

File Number –––– SELECT

SELECT

SELECT [ESC]

[ESC]

[ESC] –––– Quit this menu Drive letter to change drive.

Quit this menu Drive letter to change drive.

File:

Documentation: NOT AVAILABLE

1111---- ALL.BIN

ALL.BIN

Files of the type you selected in the main menu and which are in the current directory are
displayed in the

File

window.

To change directory, type the drive letter. If there are any files of the type you selected in this
directory, they will be displayed in the

File

window.

The

Documentation

window displays “NOT AVAILABLE”. It will be used in the future for

displaying the contents of a .doc file.

StockCheck.com

Downloaded from StockCheck.com

Summary of Contents for P3S440BX

























































































































Search results

Summary of Contents for P3S440BX

Reviews:

Brands by name

Popular brands

Kontron P3S440BX, Technical Reference Manual

Search results

Summary of Contents for P3S440BX

Reviews:

Brands by name

Popular brands