Kontron Mungo545, User Manual

Page: 85 / 88

80 Mungo545 User’s Manual
LAN Driver Installation for Windows NT 4.0
Mungo545 comes with a driver CD Windows NT 4.0 Drivers that is to be
used in conjunction of the LAN driver installation. Follow the steps
below to install the drivers for Windows NT 4.0. You can choose two
approaches below and install your system.
Driver installation Approach : When you are in Windows NT:
1. Insert the driver CD into the CD-ROM drive. The CD-ROM
autoruns and displays the selections available. Click Little
Board in this manual and choose Mungo545. Next, Click on Intel
82559 LAN Driver and the following window appears.
2. In license agreement comes out, select “I accept the terms in
the license agreement” and click next.
3. On seeing the drive and path “ C:\Intel ”, next
⇒
Finish .
4. At this time, START
⇒
Setting
⇒
Control Panel.
5. Choose the Network icon, and in the Network Setting dialog box
⇒
Wired to network
⇒
Next . When Network Adaptor comes
out
⇒
Select from List .
⇒
Have Disk to match your hardware.
6. Type “ C:\Intel ”
⇒
OK . Next, you will see the Intel ® Pro Adapter
appears
⇒
OK .
7. As the Intel ® Pro Adapter has been searched for by the
system,
⇒
next.
8. When the following Network Protocol comes out, you can select
and setup one of them.
⇒
Next.
9. Insert your Windows NT4.0 CD into your CD-ROM Drive, then
type “d:\i386”
⇒
Continue. .
10.
⇒
No
⇒
refer to network environment and setup your system.
11.
⇒
Finish
⇒
restart your computer and then take effect.
Make driver Disk Approach : When you are in Windows NT:
1. Insert Driver CD into CD-ROM drive, besides, preparing for a
1.44 Mbit diskette into Floppy Disk Drive A.
2. Click START
⇒
Run . Type: “A: \ lan\ 8255X\ makedisk \
makent.bat,
⇒
OK.
3. At this time, Windows NT driver will be created by your system.
4. Then, you can use this diskette to install your LAN driver.
Remember: if you would like to use diskette to install your
system, please follow step 6 and type “A:\” to continue your
installation.