Kontron Mungo545, User Manual

Page: 35 / 88

30 Mungo545 User’s Manual
Power LED and Keylock: Pins 11 - 15
The power LED indicates the status of the main power switch. The
keylock switch, when closed, will disable the keyboard function.
Pin # Signal Name
11 Power LED
12 No connect
13 Ground
14
15 Ground
Turbo LED Connector: Pins 8 and 18
There is the no turbo/deturbo function on the embedded board. The
Turbo LED on the control panel will always be on when attached to
this connector.
Pin # Signal Name
8 5V
18 Ground
Reset Switch: Pins 9 and 19
The reset switch allows the user to reset the system without turning
the main power switch off and then on. Orientation is not required
when making a connection to this header.
Hard Disk Drive LED Connector: Pins 10 and 20
This connector connects to the hard drive activity LED on control
panel. This LED will flash when the HDD is being accessed.
Pin # Signal Name
7 Power button
17 Ground