Kontron Mungo545, User Manual

Page: 62 / 88

Mungo545 User’s Manual 57
PnP/PCI Configuration
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI boards must be set to this value.
PnP/PCI Configurations Setup Utility – Copyright © 1984-2001 Award Software
PNP OS Installed
This field allows you to specify if the operating system installed in your
system is plug and play aware.
NOTE : Operating systems such as DOS, OS/2, and Windows 3.x do not
use PnP.
Reset Configuration Data
This field allows you to determine whether or not to reset the
configuration data. The default value is
Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically. However, this capability needs you to use a PnP operating
system such as Windows 95 and Windows 98. The default value is
Manual.
IRQ Resources/DMA Resources
To configure the IRQ Resources and DMA Resources, these Resources
Controlled By field should be set to Manual . Noted: IRQ-3, 4, 5, 7, 10 are
assigned to ISA by manual.