Kontron KBox A-330-RPI, User Manual

Page: 35 / 46

KBox A-330-RPI - Draft
www.kontron.com // 35
Power Specification 11.4.
The KBox A-330-RPI is powered by a 2-pin Input power connector on the front panel and has no internal power
supply. The standard input voltage of 24 V DC is converted internally to supply all other required voltages.
Hot Plugging the power supply is not supported. Hot plugging might damage the board.
Table 7: Power Specification
Nominal Input Voltage 24 V DC
Input Voltage Range 12 V DC to 36 V DC
Input Power Mating Connector 2-pin Phoenix Contact FMC 1,5/ 2-ST-3,5 BK
11.4.1. Power Consumption
The power consumption of the KBox A-330-RPI depends on the implemented mainboard capacity and external
interfaces, for more information see Table 8: Power Consumption.
Table 8: Power Consumption
Power Consumption
Type Label Rating
Mainboard (Burn-In) External Interfaces Total
100% RAM
100% CPU
100% Disk
2x Ethernet
2x USB 3.0
1x HDMI
Mai
External Interfaces
Voltage
32 V to 9 V (Max. range)
Current tbd
tbd tbd tbd Power tbd
11.4.2. Protective Earth
There is no protective earth stud bolt on the front panel connected to the chassis GND inside the system. Protected
Earth is directly attached to the housing and electronic ground.
11.4.3. Environmental Specification
Table 9: Environmental Specification
Temperature (Operating) 0°C - 55°C ambient
Relative Humidity (Operating)
10%-90% RH @ 39°C, non condensing