background image

KBox A-150-HSW -  Rev. 1.0 

 

www.kontron.com 

 

// 3 

 

 

 

 

KBOX A-150-HSW – USER GUIDE  

 

 

 

 
Disclaimer   

Kontron  would like to point out that the information contained in this user guide  may be subject to alteration, 
particularly as a result of the constant upgrading of Kontron products. This document does not entail any guarantee 
on the part of Kontron with respect to technical processes described in the user guide or any product characteristics 
set out in the user guide.  Kontron  assumes no responsibility or liability for the use of the described product(s), 
conveys no license or title under any patent, copyright or mask work rights to these products and makes no 
representations or warranties that these products are free from patent, copyright or mask work right infringement 
unless otherwise specified. Applications that are described in this user  guide  are for illustration purposes only. 
Kontron  makes no representation or warranty that such application will be suitable for the specified use without 
further testing or modification.  Kontron  expressly informs the user that this user guide  only contains a general 
description of processes and instructions which may not be applicable in every individual case. In cases of doubt, 
please contact Kontron. 

This  user guide  is protected by copyright. All rights are reserved by Kontron.  No part of this document may be 
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer 
language, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the 
express written permission of Kontron.  Kontron  points out that the information contained in this user guide  is 
constantly being updated in line with the technical alterations and improvements made by Kontron to the products 
and thus this user guide only reflects the technical status of the products by Kontron at the time of publishing. 

Brand and product names are trademarks or registered trademarks of their respective owners. 

©2018 by Kontron S&T AG 

 

Kontron S&T AG 

Lise-Meitner-Str. 3-5 
86156 Augsburg 
Germany 
www.kontron.com 

 

 

 

 

Summary of Contents for KBox A-150-HSW








































































Reviews: