Kontron ETXexpress UGM, User Manual

Page: 21 / 49

6 Connector and feature description
Kontron User's Guide ETXexpress UGM
Evaluation Board
21
6.6 IDE and Compact Flash (J4, J14, J15)
The primary 40pin IDE connector J4 supports up to two IDE devices such as optical drives and hard drives
if jumper J15 is open. Locate the red marked line 1 of your IDE cable to connect with pin 1 of the IDE pin
header. Close jumper J15 to enable the CF Card Socket J14 as Master or Single drive. An optional second
IDE device must be configured as Slave on the IDE connector if CF is enabled.
Pin CF pin out IDE pin out Pin CF pin out IDE pin out
1 GND #RESET 2 D03 GND
3 D04 D7 4 D05 D8
5 D06 D6 6 D07 D9
7 #CS1 D5 8 GND D10
9 #ATA_SEL D4 10 GND D11
11 GND D3 12 GND D12
13 5V VCC D2 14 GND D13
15 GND D1 16 GND D14
17 GND D0 18 A02 D15
19 A01 GND 20 A00 Key Pin
21 D00 #DMARQ 22 D01 GND
23 D02 #IOW 24 n.c. GND
25 n.c. #IOR 26 n.c. GND
27 D11 IORDY 28 D12 CSEL
29 D13 #DMACK 30 D14 GND
31 D15 INTRQ 32 #CS3 n.c.
33 GND A01 34 #IOR #PDIAG
35 #IOW A00 36 #WE A02
37 INTRQ #CS1 38 5V VCC #CS3
39 #CSEL #ACT/#DASP 40 n.c. GND
41 #RESET 42 IORDY
43 #DMARQ 44 #DMACK
45 #DASP 46 #PDIAG
47 D08 48 D09
49 D10 50 GND