Kontron ETX-LX2, Manual

Page: 66 / 73

12 Appendix D: ETX® Connector Pinouts
Kontron User's Guide ETX®-LX2 65
12.8 Compact Flash Socket
A Compact Flash Socket for commercial CompactFlashes TypeII is integrated on the module. You can use
the CompactFlash Card as a master device on the secondary IDE channel which is realized over the VIA
VT6421A SATA Controller.
Note1: The SATA controller VIA VT6421 (SATA Ports and Onboard Compact Flash) is only supported with Linux
Kernel 2.6.18 or later and Windows XP/2k with installed device driver. Please refer to the ETX®-LX
download section on the Kontron web page for the latest Windows SATA driver revision.
Note2: A second VT6421 OPROM with native IDE support is supported. Select 'IDE' as SATA/2nd IDE operation
mode in setup for full IDE support on secondary IDE and Compact Flash (e.g. for Sandisk 5000 CF Cards).
Please refer to the ETX®-LX download section for the IDE driver package.
12.8.1 Compact Flash Socket pinout
Pin Signal Pin Signal
1 GND 2 SIDE_D3
3 SIDE_D4 4 SIDE_D5
5 SIDE_D6 6 SIDE_D7
7 SIDE_CS0# 8 GND
9 GND 10 GND
11 GND 12 GND
13 VCC3 14 GND
15 GND 16 GND
17 GND 18 SIDE_A2
19 SIDE_A1 20 SIDE_A0
21 SIDE_D0 22 SIDE_D1
23 SIDE_D2 24 n.c.
25 n.c. 26 n.c.
27 SIDE_D11 28 SIDE_D12
29 SIDE_D13 30 SIDE_D14
31 SIDE_D15 32 SIDE_CS1#
33 n.c. 34 SIDE_IOR#
35 SIDE_IOW# 36 VCC3
37 SIDE_IRQ 38 VCC3
39 -CSEL 40 n.c.
41 DIE_RST# 42 SIDE_RDY
43 SIDE_DRQ# 44 DDACK# IN
45 DASP-S 46 PDIAG-S
47 SIDE_D8 48 SIDE_D9
49 SIDE_D10 50 GND