www.kontron.com
CP6930-1 User Guide
3
1.1.2
General compliances
The Board is compatible to the following standards:
•
PICMG® 2.0 R3.0 CompactPCI® Specification, as amended by ERN 2.0-3.0-002
•
PICMG® 2.1 R2.0 CompactPCI® Hot Swap Specification
•
PICMG® 2.5 R1.0 CompactPCI® Computing Telephony Specification
•
PICMG® 2.9 R1.0 CompactPCI® System Management Specification
•
PICMG® 2.10 R1.0 Keying of CompactPCI® System Management Specification
•
PICMG® 2.16 R1.0 Sep. 5, 2005 Packet Switching Backplane Specification
•
Intelligent Platform Management Interface Specification V1.5
•
IEEE 802.3, 2000
•
IEEE 802.3ae 2002
•
Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA), Sept. 14th, 2000
•
ANSI/Vita 31.1
•
ANSI/Vita 47-2005
1.1.3
Hot Swap Capability
The board supports Full Hot Swap capability as required by PICMG 2.1 R2.0. It can be removed or inserted in a powered slot.
Please refer to the PICMG 2.1 R2.0 specification for additional details.
1.2
Optional Accessories
1.2.1
Rear and Front IO Modules
The IO modules provide additional GbE switch ports and out-of-band management access via RS232. With an appropriate
backplane, all switch ports of the CP6930-1 that connect to the backplane can be accessed using the module.
The following modules supporting the CP6930-1 are available:
Table 1-1:
CP6930-1 IO Modules
Front/
Rear
Module
Order Number
Number of
Ports
Type of Ports
Module
width
Serial
Port
Rear
CP-RIO6-923
36309
12
GbE RJ45
1 slot
Yes
Rear
CP-RIO6-923
36310
24
GbE RJ45
2 slots
Yes
Front
CP-RIO6-923-F12
1036-3618
12
GbE RJ45
1 slot
No
Front
CP-RIO6-923-F
1031-8530
24
GbE RJ45
2 slots
No
Front
CP-RIO6-923-F-8M12
1035-9343
8
FE M12 (d coded) 1 slot
No
