www.kontron.com
CP6930-1 User Guide
2
•
Board Temperature monitoring via I²C enabled sensors
Power Supply
•
5V and 3.3V only board, no 12V or -12V required
•
IPMB_PWR or 5V used for 3.3V PM (generated by LDO)
•
Hot Swap support
•
5V and 3V3 V stabilization
•
Point of Load Converters for chip core voltages
Miscellaneous
•
Management connection to Unit Computer via RS232 front RJ45
•
Management connection to Unit Computer using front 10/100/1000Base-T management port
•
Management connection to Unit computer via RS232 at J4
•
FRU data storage (serial ID) in Unit Computer NOR Flash
•
Board support package includes WindRiver Linux, device drivers, protocol stacks bootloader and power on self tests
•
Metalwork compliant to PICMG® 2.0 6U/4HP (233.35 mm by 160 mm) / (20.32 mm typ.)
•
Optionally NV Memories can be hardware protected
Note...
SFP or SFP+ modules are not included with the CP6930-1. An application note
with a list of modules successfully operated in the CP6930-1 is available upon
request.
