www.kontron.com
CP6924-1-RA-A User Guide
68
(Ethernet Fabric) #reload
6.
In case of problems with booting the system, last working backup image will automatically be copied to active image.
This procedure restores normal system behavior. Configuration settings made with active image are lost and should
be saved by copying active image to backup image before.
7.
After verifying the correct operation, it is recommended to copy active image to backup image to have a fully redun-
dant system
(Ethernet Fabric) #copy active backup
Copying active image to backup image
(Ethernet Fabric) #
The image will be copied including the configuration settings currently stored for active image.
4.5.2
Updating IPMI Firmware
Updating the IPMI firmware is done with the “copy” command. If the flash process is interrupted or fails, the IPMC will
automatically recover using the previously installed image.
The IPMI firmware package file is provided in .pkg format and is stored in the data/update directory of the release directory
tree.
(Ethernet Fabric) #copy tftp://192.168.50.5/CP6924-ipmi-GA-2.00.pkg ipmi
Flashing a new IPMI firmware will disable the IPMI Controller for some minutes.
Are you sure to update the IPMI firmware? (y/n)y
...
(Ethernet Fabric) #
