www.kontron.com
CP6924-1-RA-A User Guide
20
2.3
Standard Removal Procedures
To remove the board proceed as follows:
1. Ensure that the safety requirements indicated in chapter Safety Requirements are observed.
2. Ensure that no power is applied to the system before proceeding.
3. Disconnect any interfacing cables that may be connected to the board.
4. For removing the board from the system, refer to the system manual.
2.4
Software Installation
The CP6924 comes as a pre-installed system with all necessary OS, filesystem, drivers and applications factory-installed
with default configurations.
Updating the Software with new operating system or applications or new versions is provided by a dedicated update mech-
anism, which is described in Chapter 4.
WARNING
Care must be taken when applying the procedures below to ensure that nei-
ther the CP6924 nor other system boards are physically damaged by the
application of these procedures.
