The uEFI Shell
CP6004-SA/-RA/-RC/CP6004X-SA
Page 44
ID 1053-6161, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
6.2.2
kboardconfig uEFI Shell Command
kboardconfig
FUNCTION:
Configure the non-volatile board settings
SYNTAX:
kboardconfig [-?][-b][-nc] <option> <parameter>
where:
?
Used to show HELP
-b
Used to invoke page break in the display output
-nc
Used to disable color
<option>
Used to select option
<parameter>
Used to specify parameter for option selected
The command notation above indicates only the possible modifiers and
not the command’s syntax logic.
There are eight defined variations of this command:
kboardconfig
lists options and their current status
kboardconfig -b
lists options, their current status, and in-
vokes page breaks in the display output
kboardconfig -nc
lists options, their current status, and dis-
ables color in the display output
kboardconfig -?
provides HELP information
kboardconfig -? -b
provides HELP information and invokes
page breaks in the display output
kboardconfig <option>
provides HELP for option specified and the
current status of the option
kboardconfig <option> -nc
provides HELP for option specified, the
current status of the option, and disables
color in display output
kboardconfig <option> <parameter>
sets the <parameter> to be used with the
<option> specified
DESCRIPTION:
The
kboardconfig
command is used to configure non-volatile board
settings. For information on default settings, refer to Chapter 5.7,
Restore Defaults, and Chapter 6.2.6, kclearnvram uEFI Shell
Command.
