CP6004-SA/-RA/-RC/CP6004X-SA
Boot Setup
ID 1053-6161, Rev. 3.0
Page 29
D R A F T — F O R I N T E R N A L U S E O N L Y
3.1.7
Option ROM Messages
This function is used to control the messages of the loaded PCI option ROMs.
Default setting: Force BIOS
3.1.8
Interrupt 19 Capture
This function is used to specify if legacy PCI option ROMs are allowed to capture software in-
terrupt 19h.
Default setting: Disabled
3.2
Boot Option Priorities
3.2.1
Boot Option #1..4
These functions are used to form the boot order and are dynamically generated. They repre-
sent either a legacy BBS (BIOS Boot Specification) class of devices or a native uEFI boot entry.
Press Return on each option to select the BBS class / uEFI boot entry desired.
3.2.2
Hard Drive/Network Device/CD/DVD ROM Drive/Floppy Drive/ BEV
Device BBS Priorities
These functions lead to sub-menus that allow configuring the boot order for a specific device
class. These options are visible only if at least one device for this class is present. These func-
tions are dynamically generated.
SETTING
DESCRIPTION
Force BIOS
Use this setting to force to a BIOS-compatible output. This will show the option ROM mes-
sages.
Keep Current
Use this setting to keep the current video mode. This will suppress option ROM messages.
Option ROMs requiring interactive inputs may not work properly in this mode.
SETTING
DESCRIPTION
Disabled
Use this setting to prevent legacy PCI option ROMs from capturing software interrupt 19h.
Enabled
Use this setting to allow legacy PCI option ROMs to capture software interrupt 19h.
