CP3003-SA
Configuration
ID 1052-6929, Rev. 3.0
Page 4 - 17
D R A F T — F O R I N T E R N A L U S E O N L Y
4.2.16
General Purpose Output Register (GPOUT)
The General Purpose Output Register holds the general purpose output signals of the rear I/O
CompactPCI connector J2. This register can be used only if the CP3003-SA is ordered as a rear
I/O version and the rear I/O GPIO operation is configured through the dedicated rear I/O module
configuration signal on the CompactPCI J2 connector.
Table 4-18: General Purpose Output Register (GPOUT)
REGISTER NAME
GENERAL PURPOSE OUTPUT REGISTER (GPOUT)
ADDRESS
0x292
BIT
NAME
DESCRIPTION
RESET
VALUE
ACCESS
7 - 3
Res.
Reserved
00000
R
2
GPO2
General purpose output 2 signal (3.3V LVTTL):
0 = Output low
1 = Output high
0
R/W
1
GPO1
General purpose output 1 signal (3.3V LVTTL):
0 = Output low
1 = Output high
0
R/W
0
GPO0
General purpose output 0 signal (3.3V LVTTL):
0 = Output low
1 = Output high
0
R/W
