KONTRON
coolMONSTER/S User’s Guide
63
Appendix B:BIOS Operation
Feature
Option
Description
Parallel Port
Disabled
Enabled
OS Controlled
Auto
Disabled turns off port.
Enabled requires user to enter
base I/O address and IRQ.
OS Controlled lets the PNP OS
configure the port after bootup.
Auto makes BIOS configure port.
Mode
Output only,
Bi-directional
,
EPP, ECP
Sets mode for parallel port.
Base I/O address
378h
, 278h, 3BCh
Select I/O base of port.
IRQ
IRQ 5,
IRQ 7
Select IRQ of parallel port.
DMA
DMA0
, DMA1, DMA2,
DMA3
Select DMA channel of port if in ECP mode.
USB Host Controller
Disabled
Enabled
Enables or Disables onboard USB host controller.
USB BIOS Legacy Support
(*)
Disabled
Enabled
Enable or disable support for USB keyboard and
mouse. Enable for use with non-USB aware OSes
such as UNIX and DOS.
Watchdog Settings
Submenu
Opens Watchdog Settings submenu.
Notes
: In the Option column, bold represents default settings.
(*) If BIOS Legacy USB Support is enabled, a 16kB block of upper memory in the
area from CC000h to E7FFFh will be used for USB. This area is located
dynamically from the upper location at E4000h-E7FFFh down to the lower
location at CC000h-CFFFFh. The BIOS reports a resource conflict if it cannot find
a free 16kB block in that area.
25.3.12.
Watchdog Settings Submenu
Feature
Option
Description
Mode
Disabled
Reset
NMI
Select watchdog operation mode.
Delay
1s, 5s, 10s,
30s
, 1m, 5m, 10m,
30m
Time until watchdog timer starts to
count.
Timeout
0.4s, 1s, 5s, 10s,
30s
, 1m, 5m,
10m
Max. trigger period.
Note
: In the Option column, bold represents default settings.
StockCheck.com
