KONTRON
coolMONSTER/S User’s Guide
39
Feature Interface
20.
FEATURE INTERFACE
20.1
Connector
The feature connector is available through Connector X6 (26 pins) and controls functions such as
the PS/2 keyboard clock and data, hard-disk LED, USB serial bus port, and ATX power signals.
Pin Signal Name
Function
Pin Signal Name
Function
1
KBCLK
PS/2 Keyboard clock
2
MSCLK
PS/2 Mouse clock
3
KBDAT
PS/2 Keyboard data
4
MSDAT
PS/2 Mouse data
5
VCC (*)
+5V
6
NC (**)
Internal use only!
7
NC (**)
For internal use only!
8
GND
Ground
9
H_LED
Hard-disk LED
10
NC (**)
Internal use only!
11
NC (**)
For internal use only!
12
SPEAKER
Speaker out
13
KBLOCK
Keyboard Lock
14
NC (**)
Internal use only!
15
GND
Ground
16
/RESIN
Reset input
17
NC (**)
For internal use only!
18
NC (**)
Internal use only!
19
5V_SB
ATX standby supply
20
LILED (***)
Link integrity LED
21
PS-ON
ATX power on signal
22
SPEEDLED
Speed LED
23
PWRBTN
ATX power button
24
ACTLED (***)
Activity LED
25
USB2-
Universal serial bus port 2 (-) 26
USB2+
Universal serial bus port 2 (+)
Notes
:
(*)
To protect external power lines of peripheral devices, make sure that
-- the wires have the right diameter to withstand maximum available current
-- the enclosure of the peripheral device fulfils fire-protection requirements
-- of IEC/EN 60950.
The current of the pins on this connector is limited to 0.5A.
(**)
Do not connect anything to these pins!
(***)
Since hardware revision CE?32 the LEDs for LINK and ACTIVITY are
already integrated in the RJ45 connector.
20.2
Configuration
You cannot configure the Feature interface from the BIOS Setup Utility.
StockCheck.com
