Kontron AdvancedTCA AT8050 User Manual Download Page 106

Page: 106 / 165

Software Setup

AT8050

www.kontron.com

5.1.4.2

ACPI Configuration sub-menu

5.1.4.3

Drive Configuration sub-menu

Feature

Option

Description

Help text

ACPI Version Features

V3.0

V2.0
V1.0

Support for 64-bit addressing for ACPI System

Description Tables in ACPI 3.0, Only 32 bit for

others description tables.

Enable RSDP pointers to

64-bit Fixed System

Description Tables.

Different ACPI version

has some addition.

ACPI APIC Support

Enabled

Disabled

Support for ACPI APIC table pointer to Root

System Description Table, RSDT pointer list can

be enabled/disabled.

Enabled: ACPI APIC table

support. Disabled: ACPI

APIC table not

supported.

Headless Mode

Enabled

Disabled

Headless operation mode through ACPI can be

enabled/disabled.

Enabled: Headless

operation mode through

ACPI supported.

Disabled: Headless

operation mode through

ACPI not supported.

Feature

Option

Description

Help text

SATA#1 Configuration

Disabled
Compatible

Enhanced

Select whether the controller is using only

legacy resources i.e. IRQ 14-15(compatible) or

with memory resources only (Enhanced). Only

shows when SATA#1 is configure in IDE mode.

AHCI: allows advanced

SATA features such as

Native Command

Queuing and hot plug.

IDE is legacy disk usage.

Configure SATA#1 as

AHCI

IDE

Advanced Host Controller Interface (AHCI) is

AHCI: allows advanced

SATA features such as

Native Command

Queuing and hot plug.

IDE is legacy disk usage.

SATA Port 0 (PM)

N/A

Selects sub-menu. Only shows if "Configure

SATA#1 as" is set to "IDE"

While entering setup,

BIOS auto detects the

presence of IDE devices.

This displays the satus of

auto detection of IDE

devices.

SATA Port 1 (SM)

N/A

Selects sub-menu. Only shows if "Configure

SATA#1 as" is set to "IDE"

While entering setup,

BIOS auto detects the

presence of IDE devices.

This displays the satus of

auto detection of IDE

devices.

SATA Port 2 (PS)

N/A

Selects sub-menu. Only shows if "Configure

SATA#1 as" is set to "IDE"

While entering setup,

BIOS auto detects the

presence of IDE devices.

This displays the satus of

auto detection of IDE

devices.

AHCI Configuration

N/A

Selects sub-menu.

Section for AHCI

Configuration.

Summary of Contents for AdvancedTCA AT8050






































































































































































Search results

Summary of Contents for AdvancedTCA AT8050

Reviews:

Brands by name

Popular brands

Kontron AdvancedTCA AT8050, User Manual

Search results

Summary of Contents for AdvancedTCA AT8050

Reviews:

Brands by name

Popular brands