886LCD-M Family
KTD-00474-E
Public User Manual
Date: 2005-05-24
Page
10 of 78
3. System
specification
3.1 Component main data
The table below summarises the features of the 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX
embedded motherboards.
Form factor
886LCD-M/Flex: Flex-ATX (190,50millimeters by 228,60millimeters)
886LCD-M/ATX: ATX (190,50millimeters by 304,00millimeters)
886LCD-M/mITX: mini ITX (170.18millimeters by 170.18millimeters)
Processor
•
Support for Intel Pentium M and Celeron M Processors in mPGA478 socket with
400MHz system bus.
•
Banias (0.13um) and Dothan (0.09um) family processors.
Memory
•
For /Flex and /ATX: 2x184pin DDR SDRAM Dual Inline Memory Module (DIMM)
sockets.
•
For /mITX: 1x184pin DDR SDRAM Dual Inline Memory Module (DIMM) sockets.
•
Support for DDR 266/333 (PC2100/PC2700)
•
Support for up to 2GB of system memory (/Flex and /ATX)
•
Support for up to 1GB of system memory (/mITX)
•
ECC support depend on Intel
Chipset
Intel 855GME Chipset consisting of:
•
Intel® 855GME Chipset Graphics and Memory Controller Hub (GMCH)
•
Intel® 6300ESB I/O Controller Hub (ICH)
•
4 Mbit Firmware Hub (FWH)
Video
•
Intel Extreme Graphics 2 controller
•
Analog Display Support, 350-MHz integrated 24-bit RAMDAC with support for
analogue monitors up to 2048x1536 at 75 Hz
•
Digital Video Out Port (DVOB & DVOC) support, dot clock up to 165-MHz
DVI DVO ADD and CRT DVO ADD supported.
LVDS DVO ADD cards currently not supported
•
Single or dual channel LVDS panel support (18/ 24bit OpenLDI / SPWG) up to
UXGA panel resolution
•
Dual independent pipe support, Mirror and Dual independent display support
Tri-view support through LVDS interface, DVO B/C port, and CRT
CRT – LVDS supported
CRT - DVO/ Add card supported
LVDS - DVO/ Add card supported
•
AGP 2.0, 1.5V connector (DVO B/C muxed w/ AGP) supporting 1x, 2x, and 4x
AGP cards or an AGP Digital Display (ADD) card
Audio
Audio, AC97 version 2.3 subsystem using the Realtek ALC655 codec
•
Audio
Amplifier
o
/FLEX and /ATX: 4x3W
o
/mITX:
2x3W
•
Line-out
•
CDROM
in
•
SPDIF
Interface
(Surround)
•
Microphone
Onboard speaker
I/O Control
Winbond W83627THF LPC Bus I/O Controller
Peripheral
interfaces
•
Four USB 2.0 ports
•
Four Serial ports (RS232).
Note
: Intel 6300ESB Serial port FIFO (COM C+D) is
not standard compliant. May cause issues with specific SW.
•
One Parallel port, SPP/EPP/ECP / Floppy (optional floppy with special cabling)
•
Two Serial ATA 150 IDE interfaces, ATA Mode 6 not supported due to Intel
Chipset restrictions.
•
Two Parallel ATA IDE interfaces with UDMA 33, ATA-66/100 support
•
PS/2 keyboard and mouse ports
(continued)