1. Unscrew
3. Couple of threads showing
(shuttle shown cut away for clarity)
2. pull outer cable
2. Unwind cable
1. Unscrew the short
roundhead screw a couple of
turns to free the cable.
2. Unwind the outer cable
from the screw and pull the
cable out of the base plate.
Leave the cables attached
to the top plate.
3. Screw the long roundhead
screw further into the shuttle
so that there are a couple of
threads showing in the hole in
the shuttle.
Repeat for the other 2
shuttles.
Tensegrity Table assembly instructions page 38 of 46
Copyright Kontax Engineering Ltd 02/11/21
