1. Unscrew
2. pull outer cable
2. Unwind cable
3. Couple of threads into shuttle.
(shuttle shown cut away for clarity)
1. Unscrew the short
roundhead screw a
couple of turns to free
the cable.
2. Unwind the outer
cable from the screw
and pull the cable out of
the base plate. Leave
the cables attached to
the top plate.
3. Unscrew the long
roundhead screw from
the shuttle completely
and then screw it back
in a couple of turns.
Repeat for the other 2
shuttles.
Tensegrity Table assembly instructions page 29 of 46
Copyright Kontax Engineering Ltd 02/11/21
