GPS\GSM fleet management tracking system www.konlen.com
5-18
Ⅱ
Ⅱ
Ⅱ
Ⅱ
Main device installtion
Note: This product is not waterproof. Please choose the dry location to install.
2.1 Main device diagram
1. Main device 2. SIM card slot
3. Rear cover of main device 4. Back-up battery switch
5. Main device side 6. Main device ID No.
7. Main device side 8. GSM antenna connector
9. GPS antenna connector 10. Main device front panel
11. Cable installation hole 12. Double color LED light
13. MIC connector
103A6A: 6 Pin installation cable:
103A3A: For User self-defined alarm(one anode trigger and one cathode trigger) and device updating
103A4A: External device serial port, support one rout of camera or overspeed alarm buzzer etc.
2.2 SIM card installation
A. Take off the rear cover of main device by screwdriver
B. Install the SIM card as below steps.
（
Step 1
）
（
Step 2
）
（
Step 3
）
C. Connect external power supply and turn on the backup battery after installing the SIM card.
Note:
a. Make sure the SIM card can make phone call, receive & sending SMS.
b. Make sure the SIM card with enough money and can access to GPRS internet function.
