Konig SEC-CON22, Manual, Page: 14 / 18

14
Picture 4.2.4-2
Press
【
3
】
Run the TOUR
Attention
：
4.3 Protocol set up
Enter the menu as picture
（
4.1.1-1
）
, Press
【
3
】
enter the Protocol setting as picture (4.3-1)
4.3.1 Pelco Matrix model
Press
【
1
】
enter the PELCO Matrix model as the picture (4.3.1-1);
And then press the
【
ENTER
】
to select the Protocol and back to previous menu.
Picture 4.3.1-1
4.3.2 Dome control model
Press
【
2
】
enter the dome control model as the picture ( 4.3.2-1).
According to the user’s need, select the suitable PROTOCOL and back to the previous menu.
Picture 4.3.2-1
Enter the menu as picture (4.1.1-1) and press the
【
5
】
to exit the menu.
5. Appendix
5.1 RS485 Bus Basic Knowledge
●
RS485 Bus Basic Character
According to RS485 industrial
standards, RS485 Bus is of half-duplex data transmission cables
with characteristic impedance as 120. The maximum load capacity is 32 unit loads (including main
controller and controller equipment)
This model have no the insert tour
preset function
1. Pelco Matrix
2. DH DVR
1.Factory
2.Pelco-P
3.Pelco-D
Picture 4.3-1
1. Matrix/DVR
2. Dome