ENGLISH
9
3
Searching Wi‑Fi Router
The status LED will flash green until the Wi-Fi
router is found (up to 5 minutes).
Once the router is found, the status LED will
become orange.
If the IP baby monitor cannot connect to the
Wi-Fi router, please check the Wi-Fi router
status or re-install.
In the app, select the camera name that is
shown in the Camera List, and the viewing
window will open (see Figure 15).
Figure 15
Add already installed IP baby monitor to the app
ANDROID (for Apple go to: Step 5)
1
Open the “uCare Cam” app and select:
: Click here to import installed Wi-Fi Camera
In the Camera List Window screen (see Figure 16) for adding an
IP baby monitor.
2
Select the tab:
Your device will now enter the QR code mode.
Note: you need to have a QR code scanner installed on your device.
3
Locate the QR code on the backside of the IP baby monitor and scan
the QR code. After scanning the QR code, the UID (Unique ID code)
appears in the screen of your device (see Figure 17).
4
Enter a personal camera name and password and select the tab:
(see Figure 17).
The new camera will be added to the list (see Figure 18).
