2
2. System requirements
2.1 Windows®
- Windows® 98SE / ME / 2000 / XP
- 233 MHz Pentium® II or higher
- 64 MB RAM (128 MB recommended)
- USB 1.1 Port (USB 2.0 recommended)
- CD-ROM drive for installation
- 100Base-T full duplex switch for NDAS mode
(for CMP-MOBSTOR120 only)
2.2 Mac® OS X
- Mac OS X 10.3 or greater
- 128 MB RAM (256 MB recommended)
- USB 1.1 Port (USB 2.0 recommended)
- CD-ROM drive for installation
- 100Base-T full duplex switch for NDAS mode
(for CMP-MOBSTOR120
only)
3. Hardware installation
Step 1:
Boot-up your computer into the operating system and
make sure the USB / USB2.0 port device driver has
been installed properly.
Step 2:
Plug the connector of the USB cable into the USB
Port of your USB2.0 External Drive
.
Step 3:
Plug the connector of the USB cable into the USB
port of the computer.
Step 4:
CMP-MOBSTOR15 gets its power from the USB port
of the computer. CMP-MOBSTOR25 and 120 need
the supplied external power adapter. Your USB2.0
External Drive hardware has been set up now.
Step 5:
Follow the Software Installation instructions as shown
in the next chapters to complete driver setup.