KONIG+NEURATH TALO.YOU, Operating Instructions Manual

Page: 50 / 134

SET AND DELETE PEDESTAL AND SHELF STOP
(CONTROL PANEL WITHOUT MEMORY)
Pedestal and shelf stops are safety positions that cannot be crossed
during normal operation, so that collisions with existing obstacles can
be prevented. The pedestal stop limits the movement downwards
(minimum height) and can be used if there is, for example, a pedestal
below the table. The shelf stop limits the movement of the table
upwards. The shelf stop can be used if there is, for example, a shelf
above the table.
Only trained personnel should set and delete
pedestal and shelf stops. There is a danger of
injury from incorrect settings and the table
may be damaged.
50