KONIG+NEURATH TALO.YOU, Operating Instructions Manual

Page: 55 / 134

Press the
LOGO
button below the display.
If necessary, use the
UP
and
DOWN
buttons to navigate to menu
item 1. F 1 must appear in the display.
Confirm the selection by pressing the
LOGO
button again.
The display shows the current setting I or C .
Now select the desired unit by pressing the
UP
or
DOWN
buttons.
Confirm the selection by pressing the
LOGO
button again.
Without selection or further action, the display automatically
returns to the main menu after approx. 10 seconds.
This setting is saved permanently.
item 1. F 1 must appear in the display. item 1. F 1 must appear in the display. item 1. F 1 must appear in the display.
The display shows the current setting I or C . The display shows the current setting I or C . The display shows the current setting I or C .
F 1 CHANGE UNIT
The display can show the height of the tabletop in centimetres or
inches. The unit can be changed via the menu. The height is displayed
in whole centimetres or in inches to one decimal place.
To change the unit, proceed as follows:
The display shows the current setting I or C . The display shows the current setting I or C . The display shows the current setting I or C .
55