14
1.3
If your TV has a Y, Cb, Cr input socket, please use Y, Cb, Cr port cable to
connect this system’ Y, Cb, Cr output socket with the TV’s Y, Cb, Cr input socket
to get a high quality picture. When setting the system, please set the Video
output method as Y, Cb, Cr output.
1.4
Use the Audio cable to connect the left and right sound channel of TV. then the
TVs speaker can be used for audio output.
1.5
Use a HDMI cable to connect the DVD player to the HD TV, turn ON both the
TV and DVD player, make sure the TV video IN source is configured to HDMI
mode.
2. Connection with amplifier
Connecting with left/right speakers
Use speaker cables to connect the left/right speakers with the left/right mix audio
output socket of this system to enjoy stereo music.
3. Operation steps
3.1 Connect the system as in the above illustration.
Turn on the TV, adjust the TV to the AV channel, then press STANDBY on the
machine. The display screen of the system lights up, and the opening screen
appears on the TV.
3.2
Variety of system function. Carry out the basic settings. After setup, press
OPEN/CLOSE and the disc tray will open automatically. Put a disc in, press
OPEN/CLOSE to close the disc tray, and the machine will play automatically.
3.3
When the main machine is on, all functions can be operated with the keys on
the remote control and the front panel.
3.4
In normal playback mode, press the STANDBY key on the remote control. The
machine enters standby mode, and the time is displayed.
System Setting
Press the setup key to open the navigational window, the following screen appears on
the TV.
Via the settings in the navigational systems menu you can adjust the system setup,
language setup, audio setup, video setup, speaker setup and digital setup. To navigate
within these 8 setting sub-menus, use the left and right direction keys to move between
the sub-menus. When the cursor is moved to the chosen setting symbols, the setting
menu will appear. Move the up/down direction key to choose among the setting items.
Press SETUP key again to exit the setting mode.
