- Careful use ensures functionality; in particular the usability of the crank handle
-
must be checked regularly.
- To care for the product use a damp cloth
-
and a non-abrasive cleaning agent.
FAULT FINDING (F) and SOLUTION (S)
F: The clamping ring is loose on the tube
F:
S: Tighten the threaded pin
F: The stand is listing to one side
F:
S: Check the rigging
F:
S: Check that the rigging is taught
F: S:
(use 3 point rigging, ensure the lines are taught)
F:
S: Ensure the stand is setup properly
F:
S: Check the surface
USAGE INSTRUCTIONS
CHECK, MAINTENANCE, CLEANING
a.
The clamping ring is equipped with three drill
a.
holes at intervals of120° each - which allow for a
a.
steady 3-Point-Rigging.
a.
ATTENTION:
a.
1- or 2 point riggings are only suitable
a.
in rare cases.
b.
The drill holes (ø10 mm) are used to affix the
b.
lines
b.
(string, karabiner hooks, shackles).
b.
ENSURE:
b.
First check the dimensions to ensure
b.
assembly is possible.
c.
If rigging lines are to be used, ensure that the possible danger
c.
zones are marked or blocked off. The danger area size is
c.
dependent uponthe load and the dimensions of the installation,
c.
as well as the forces (wind etc.) affecting the stand.
c.
The lines themselves can
c.
also represent a danger/risk
c.
(e.g.: danger of tripping);
c.
to mark the danger
c.
zone we recommend
c.
K&M warning strips 21402.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
24613-000-00 Rev.01 03-80-383-00 10/13
C.
INSTALLING the rigging lines
TECHNICAL DATA
Material
- Aluminum
max. Load
- to rig lines
- NOT for loads
Dimensions
- ø 65 x 12 mm
- 3 drill holes á ø10 mm
Packaging
poly bag
Weight
0.07 kg
for stands
- Clamping ring 24613
- is included with:
-
K&M-Stand 246/1
- Important: ø-extension tube 30 - 35 mm
Accessories
- not included in the delivery: 21402 Warning
-
Strips (to mark the rigging lines)
a
b
