KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
12331-000-55 Rev.05 03-80-593-00 7/18
TECHNICAL DATA
Material
Base, tube, catches, joints: Steel, powder coating
Leg tubes: Aluminum
Threads: Steel, galvanized
Bracket, shell, caps, handles: PA-6
End caps: Felt ø 25 x 3.5 mm (3x)
Dimensions
Tripod base circumference ø 730 mm
Tube combination: ø 42 mm / ø 35 mm
Height: 845-1365 mm (lower support,
see section 6.a
)
Angle of inclination: 10° (almost vertical)
Angle of inclination:
up to 90° (horizontal)
Box
Tube combination: 940 x 120 x 120 mm
Weight
4.2 kg
Accessories
Orchestra conductor desks (
see section 2
):
12332 / 12333 - 12334 / 12335 - 12338
Score trays: 12336 / 12337
3. EXTEND THE
4.
EXTENTION TUBE
4. RETRACT THE EXTENTION TUBE
5. ADJUSTING THE ANGLE OF INCLINATION
6. DIMENSIONS
Ill. 6.a
Plate 12332/33,
Measuring Point Height:
Lower support,
45° angle
MAINTENANCE, CLEANING
- Careful use of the distance rod maintains the ability to
-
extend and retract the rod, the load bearing functionality
-
of the installation, as well as the safety of the installation.
- Perform workstation maintenance only without the weight
-
on the support arms and watch for eventual risks
-
(pinched fingers, impact, the rod falls over)
- To care for the product use a damp cloth and
-
non-abrasive cleaning agent
FAULT-FINDING (F) and REPAIR (R)
F: Stand is not stable:
F:
R: Ensure that the surface is even
F:
R: Ensure that the support
1.3
is expanded
F: R:
to it fully extended position and tighten the
F: R:
clamping screws
F: The extension tube
z
retracts on its own:
F:
R: Place the catch in the groove
F: R:
and tighten the wing nut
3.3
-
3.5
F: The orchestra desk plate
section 2
tilts:
F:
R: Tighten the screws on the joint
5.3
USAGE NOTES and FUNCTION
The orchestra desk is very adjustable
both angle and height.
3./4. HEIGHT (14 positions - each step is 40 mm)
The adjusted height is doubly secure.
3. EXTEND THE EXTENTION TUBE
3.1
Loosen the wing nut of the clamping bracket
y
a bit
3.2
Extend the extension tube
z
to the desired height,
3.2
in this process the catch unlocks automatically and will
3.2
not catch into place on its own.
3.3
The catch must be pressed into the desired
3.3
groove by the operator.
3.4
As soon as the catch is in place, the tube lowers 2 mm,
3.4
and the catch ensures that it is not unwittingly unlocked.
3.5
Re-tighten the wing nut
4. RETRACT THE EXTENTION TUBE
4.1
Loosen the wing nut of the clamping bracket
y
a bit
4.2
First pull up on the extension tube
z
a bit,
4.2
in this process the catch unlocks automatically.
4.3
Then let the extension tube retract and...
4.4
...press the catch into the desired opening
4.4
until it clicks into place
4.5
Re-tighten the wing nut
5. ANGLE (10° - 90°)
The plate can be adjusted variably from:
90° = horizontal position to...
10° = ...almost vertical position. The edge protects
10° =
the music sheets from falling.
5.1
Loosen the clamp handle
5.2
Place the music desk plate in the desired position
5.3
Re-tighten the clamp handle
6. DIMENSIONS
folding size
view from
above
