background image

INSTALLATION INSTRUCTIONS

Full-motion Wall Mount

ISSUED:

 OCT. 2012

4. Adjustment

Adjust to desired location or tilt.

Maintenance

•  Check that the bracket is secure and safe to use at regular intervals(at least every three months).   
•  Please contact your dealer if you have any questions.

7

           
+15°

-15°

           
+5°

           
-5°

Tighten the two bolts by using a proper phillips screwdriver to secure bracket.

wall

safety bolt

120°

CAUTION:

 

DO NOT EXCEED MAXIMUM 

LISTED WEIGHT CAPACITY. SERIOUS 
INJURY OR PROPERTY DAMAGE MAY 
OCCUR!

200x200/300x300
400x200/400x400

47

"

MAX

45kg

(99lbs)

MAX

45kg

(99lbs)

MAX

LPA13-444

400x200/400x400
600x400/800x400

63

"

MAX

60kg

(132lbs)

MAX

60kg

(132lbs)

MAX

LPA13-484

Summary of Contents for LPA13-444

Page 1: ... your dealer if you have any questions 7 15 15 5 5 Tighten the two bolts by using a proper phillips screwdriver to secure bracket wall safety bolt 120 CAUTION DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR 200x200 300x300 400x200 400x400 47 MAX 45kg 45kg 99lbs 99lbs MAX MAX 45kg 99lbs MAX LPA13 444 400x200 400x400 600x400 800x400 63 MAX 60kg 60kg 132lbs 13...

Page 2: ...ent and all attached hardware and components If mounting to wood wall studs make sure that mounting screws are anchored into the center of the studs Use of a stud finder is highly recommended Always use an assistant or mechanical lifting equipment to safely lift and position equipment Tighten screws firmly but do not over tighten Over tightening can damage the items greatly reducing their holding ...

Page 3: ... sure to mount in a solid part of the block generally 1 25mm minimum from the side of the block It is suggested electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid breaking out the back of the hole when entering a void or cavity Installers must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware...

Page 4: ...r of the display Screw the adapter brackets onto the display Note Choose appropriate screws washers and spacers if necessary according to the type of screen 2 Install Adapter Brackets 2 1 For Flat Back Screen TV TV TV Top of display M A M B M C M F or or or M C M C M D M E M F M G M F M G M D M E M F M H M D M E M F M H M G M G 3 Hook the Display onto the Wall Mount wall ...

Reviews: