SET-UP/OPERATING INSTRUCTIONS
11905 Protective shield
11905
with stand
INTENDED USE
- The protective clear acrylic shield separates -
-
protects and keeps distance.
-
The mobile stand supports and arranges the acrylic
-
shield so that is can be used for many purposes.
-
It is particularly designed for choirs and orchestras.
FEATURES and CAPABILITIES
- The 600 x 600 x 4 mm acrylic shield is as clear as glass,
-
yet lighter and more resistant
- Thanks to the proven König & Meyer prismatic connection
-
it can be easily and quickly separated from the stand.
- The solid stand is compact foldable for transport.
- Stepless height adjustment:
-
11000 - 1600 mm (upper edge of the shield)
- Weight: 4 kg
SAFETY INSTRUCTIONS
Thank you for choosing this product. Please read and follow these instructions
carefully. They inform you about all necessary and important steps concerning
safe installation and operation. We recommend that you keep them for future
reference.
1. COMPONENTS
Please visually check that all parts are present and in good
order - as far as recognizable.
a
.1
PROTECTIVE SHIELD, consisting of:
a.1
- acrylic shield 600 x 600 x 4 mm
a.2
- receptacle-plug-in connection
b
.1
STAND cpl., consisting of:
b.1
- foldable stand base frame
b.2
- base tube
b.3
- clamp
b.4
- extension tube
b.5
- swivel joint
2. /3. /4. STAND
2. BASE
2.1
Expand legs,
2.2
loosen base screw,
2.3
pull out base tube…
2.4
…up to the stop
2.5
retighten base screw.
3. TUBE COMBINATION
3.1
Slightly loosen knurled screw of the clamp
3.2
Bring extension tube to the desired height
3.3
Retighten knurled screw
4. SWIVEL JOINT
4.1
Loosen wing nut
4.2
Vertically (90°) align the joint and the plug-in plate
4.3
Retighten wing nut
5. FITTING THE PROTECTIVE SHIELD
5.1
Please ensure that the thread of the knurled screw
5.1
on the swivel joint
b.5
does not protrude.
5.2
Fit the Protective shield
a
to the joint by pushing
5.2
the holder
a.2
as far as it will go onto the plug-in
5.2
plate of the swivel joint
b.5
5.3
Tighten the knurled screw thereby securely fixing the
5.3
Protective shield. To remove the shield loosen the knurled
5.3
screw again.
Dismantle in reverse order.
- Before and after using the product, please carry out a visual
-
inspection and check for completeness, mobility and possible
-
damage.
- If the product is damaged, it must not be used or only after a
-
qualified repair.
- Due to its transparency, the acrylic glass can be easily
-
overlooked and consequently nudged.
- Careful and cautious handling preserves the function,
-
longevity and, last but not least, safety.
- Pay attention to the tightness of the screw connections.
- The facility to adjust the product has hidden hazards and
-
therefore requires careful handling.
- Protect from adverse influences (moisture, wind, shocks).
1. COMPONENTS
2. /3. /4. STAND
2. BASE
3. TUBE COMBINATION
4. SWIVEL JOINT
5. FITTING THE PROTECTIVE SHIELD
