background image

KÖNIG & MEYER

 GmbH & Co. KG  

Kiesweg 2, 97877 Wertheim, www.k-m.de 
11903-000-55  Rev1a  03-79-195-00  5/21

TECHNICAL DATA

6. / 7. / 8. / 9./ 10. ADJUSTMENTS and  
DIMENSIONS

MAINTENANCE, CLEANING

6. ALIGNMENT

 

6.1

 Hold the protective shield sideways… 

6.2

 …and turn in the desired direction, whereby  

6.2

 there is no need to loosen the clamp. 

6.3

 The stand remains unchanged. 

   

7. HEIGHT

 

7.1

 Hold the extension, 

7.2

 slightly loosen knurled screw of the clamp, 

7.3

 retract or extend the extension as desired, 

7.4

 retighten knurled screw. 

   

8. ANGLE OF INCLINATION

  

8.1

 Whilst holding the acrylic shield, 

8.2

 loosen wing nut on the swivel joint, 

8.3

 incline the shield as desired, 

8.4

 retighten wing nut. 

   

9. POSITION

 

9.1

 Carry the complete stand and place in  

9.1

 desired location 

9.2

 NOTE! 

9.2

 Normally the feet don’t fold by themselves.  

9.2

 If they do, we recommend that you tighten  

9.2

 the corresponding Allen screws. 

  

10. DIMENSIONS

- Special maintenance intervals are not required 
- It is advisable to regularly check the strength and  

-

 mobility of the components, especially the screw  

-

 connections, these should be tight, but not too tight. 

- For cleaning, use a slightly damp cloth and a non- 

-

 abrasive cleaning agent

FAULT-FINDING (F) and REPAIR (R)

F: Installation wobbles. 

F:

 B: Check flooring (especially evenness). 

F:

 B: Check if the parts (parquet protector,  

F:

 

B:

 base, clamp, swivel joint, shield holder)   

F:

 

B:

 are complete, correctly arranged and  

F:

 

B:

 the threads firmly tightened.

6. ALIGNMENT

7. HEIGHT

8. ANGLE OF INCLINATION

9. POSITION

10. DIMENSIONS

Material

Tubes, U-pivot joint: 
- steel, powder-coated black 
Screws, washers:  
- galvanised steel,    
Base, mushroom, receptacle plug-in connector:  
- zinc-GD, powder-coated, black 
Small plastic parts:  
- PA, PE, black 
Protective shield:  
- PMMA, transparent 

Dimensions

Screen: W x H: 600 x 600 mm, thickness: 4 mm 
Height: 1000 - 1600 mm (top edge) 
Base: ø 690 mm 

Cardboard

Package 1: 653 x 653 x 30 mm (acrylic shield) 
Package 2: 730 x 125 x 77 mm (stand)

Weight

4 kg

Accessories 
(optional)

e.g., tray 12218 ff

Summary of Contents for 11905

Page 1: ...drohr herausziehen 2 4 bis zum Anschlag im Sockel 2 5 Sockelschraube wieder festziehen 3 ROHRKOMBINATION 3 1 Rändelschraube der Spannschelle etwas lösen 3 2 Auszugrohr in gewünschte Höhe bringen 3 3 Rändelschraube wieder festdrehen 4 SCHWENKGELENK 4 1 Flügelmutter lösen 4 2 Gelenk mit Steckplatte senkrecht 90 ausrichten 4 3 Flügelmutter wieder festziehen 5 SCHUTZSCHEIBE MONTIEREN 5 1 Sicherstellen...

Page 2: ...SSUNGEN Spezielle Wartungsintervalle sind nicht erforderlich Es empfiehlt sich regelmäßig die Gängigkeit und Festigkeit der Bauteile zu überprüfen insbesondere die Schraubverbindungen wobei diese fest aber nicht überfest angezogen sein sollen Zur Reinigung ein leicht feuchtes Tuch und ein nicht scheuerndes Reinigungsmittel benutzen FEHLERSUCHE F und BESEITIGUNG B F Installation wackelt F B Untergr...

Page 3: ...gs 2 2 loosen base screw 2 3 pull out base tube 2 4 up to the stop 2 5 retighten base screw 3 TUBE COMBINATION 3 1 Slightly loosen knurled screw of the clamp 3 2 Bring extension tube to the desired height 3 3 Retighten knurled screw 4 SWIVEL JOINT 4 1 Loosen wing nut 4 2 Vertically 90 align the joint and the plug in plate 4 3 Retighten wing nut 5 FITTING THE PROTECTIVE SHIELD 5 1 Please ensure tha...

Page 4: ...ws 10 DIMENSIONS Special maintenance intervals are not required It is advisable to regularly check the strength and mobility of the components especially the screw connections these should be tight but not too tight For cleaning use a slightly damp cloth and a non abrasive cleaning agent FAULT FINDING F and REPAIR R F Installation wobbles F B Check flooring especially evenness F B Check if the par...

Reviews: