- 34 -
GB
3
Installation procedure
Mounting of wall brackets
②
Picture 2 is the installation distance from awning to wall or ceiling.
Remove the plate and the retaining screw of each wall
bracket. Turning adjusting screw with a hex key 6 mm in
otherwise clockwise. Measure the distance in Figure-3.
This distance must be greater than 40 mm, (when the
distance equal to 45 mm, the angle of inclination of
awning is 80 °). Must be the same distance for all wall
brakcets.
Pressing block
Hex key
Adjusting bolt
③
W
all
W
all
Ceiling
L
α°
In
st
al
la
tio
n
he
ig
ht : C
H
ei
gh
t o
f f
ro
nt
li
ne
:
H
α°
75°
80°
60°
65°
70°
C
H+650mm
H+450mm
H+850mm
H+1050mm
H+1250mm
Pls make sure the heigth before installation according to
the height of front bar (H) and the angle of
sunshine(α°). After open the awning, the height must up
to human so it can protect your head from hitting the
awning.
Pls make sure the height and position before installation
L=2.5M
L=3M
H+780mm
H+520mm
H+1030mm
H+1270mm
H+1500mm
H+520mm
H+350mm
H+680mm
H+850mm
H+1000mm
L=2M
Carefully unpack and release the bindings. Need two persons to handle the product.
Remove and store the hardware in a safe place to avoid losing.
Beware of the sudden unfolding of any parts, especially the folding arms.
Read the assembly instructions carefully before installation.
Check for missing components and damaged parts. Do not install the product if any
parts are missing or damaged. Return to the store for free replacement.
Never modify the construction or the design of the awning. Fail to follow the instruction
can lead to personal injury or death.
The awning can be installed by non-profession provided the instructions are followed.
Make sure the wall is strong enough and is suitable for the installation of the awning.We
will not be responsible for any damage to the property and the awning due to the weak
support of installation wall.
Prior to installation
1
INSTALLATION
Carefully unpack and release the bindings. This requires two persons.
Remove and store the hardware in a safe place.
Beware of the sudden unfolding of any parts, especially the folding arms.
Read the assembly instructions carefully before installation.
Check for missing components and damaged parts. Do not install the product if any parts are mis-
sing or damaged. Contact your dealer for free replacements.
Never modify the construction or the design of the awning. Failure to follow the instructions
may lead to injury or death.
The awning can be installed by a layperson provided they follow the instructions.
Ensure the wall is strong enough and is suitable for the installation of the awning. We will not be
responsible for any damage to the property or the awning if it is installed on a weak wall.
Prior to installation
Check the height and position before installation.
Check the height before installation according
to the height of front bar (H) and the angle of
sunshine(α°). Open the awning and make sure it
is higher than human height so as to prevent the
awning from hitting your head.
3
Installation procedure
Mounting of wall brackets
②
Picture 2 is the installation distance from awning to wall or ceiling.
Remove the plate and the retaining screw of each wall
bracket. Turning adjusting screw with a hex key 6 mm in
otherwise clockwise. Measure the distance in Figure-3.
This distance must be greater than 40 mm, (when the
distance equal to 45 mm, the angle of inclination of
awning is 80 °). Must be the same distance for all wall
brakcets.
Pressing block
Hex key
Adjusting bolt
③
W
all
W
all
Ceiling
L
α°
In
st
al
la
tio
n
he
ig
ht : C
H
ei
gh
t o
f f
ro
nt
li
ne
:
H
α°
75°
80°
60°
65°
70°
C
H+650mm
H+450mm
H+850mm
H+1050mm
H+1250mm
Pls make sure the heigth before installation according to
the height of front bar (H) and the angle of
sunshine(α°). After open the awning, the height must up
to human so it can protect your head from hitting the
awning.
Pls make sure the height and position before installation
L=2.5M
L=3M
H+780mm
H+520mm
H+1030mm
H+1270mm
H+1500mm
H+520mm
H+350mm
H+680mm
H+850mm
H+1000mm
L=2M
Carefully unpack and release the bindings. Need two persons to handle the product.
Remove and store the hardware in a safe place to avoid losing.
Beware of the sudden unfolding of any parts, especially the folding arms.
Read the assembly instructions carefully before installation.
Check for missing components and damaged parts. Do not install the product if any
parts are missing or damaged. Return to the store for free replacement.
Never modify the construction or the design of the awning. Fail to follow the instruction
can lead to personal injury or death.
The awning can be installed by non-profession provided the instructions are followed.
Make sure the wall is strong enough and is suitable for the installation of the awning.We
will not be responsible for any damage to the property and the awning due to the weak
support of installation wall.
Prior to installation
1
Fig. 2 shows the distance from the awning to the walls and ceiling.
Height of front bar: H
Installation height: C
Mounting of wall brackets
Remove the plate and the retaining screw of each
wall bracket. Turn the adjusting screw with a 6 mm
allen key anti-clockwise. Measure the distance in
fig. 3. This distance must be greater than 40 mm
(when the distance is equal to 45 mm, the angle of
inclination of the awning is 80 °). This must be the
same for all wall brackets.
Ceiling
W
all
W
all
Allen key
Pressing block
Adjusting bolt
