22 OPERATION MANUAL
SERVICE AND MAINTENANCE
(1)Cleaning the inside of the Top Cover
q
After washing, be sure that the cover is
completely dry before re-installing it.
(2)Cleaning the Racks
q
Remove the top cover.
w
Remove the FIX/WASH rack first.
e
Remove the DEV rack.
1. First, remove FIX/WASH rack, and then DEV
rack.
2. Before pulling the rack out of the processor,
tilt it to drain the excess liquid off into the
tank grabbing the handles on the left and
right hand side.
r
Scrub each rack. including the rollers, with a
sponge (or clean cloth) and rinse the grime off
with warm water (under 104
<
).
After rinsing, place the racks at an angle to drain
the excess water off.
t
Wipe the first heater roller with a damp sponge
(or cloth) to remove the dirt. Use long smooth
wiping strokes,
NEVER SCRUB IT
.
To keep the SRX-101A working at optimum performance for as long as possible, perform the following service and
maintenance procedures on a regularly scheduled basis. Always make sure that the processor’s power switch is
OFF before beginning these procedures.
Monthly Service and Maintenance
1
TO REMOVE THE RACKS:
™
FIX/WASH Rack
™
DEV Rack
™
First Heater Roller
