Konica Minolta REGIUS SIGMA2, Operation Manual

Page: 23 / 76

23 23
Chapter 2
2 .2 Names of Parts and Functions
2 .2 .1 Front / Left Side / Top
Status Lamp
Internal
Area
Unjamming Dial
Light Collection Unit
Cleaning Handle
(Bottom Surface)
Top Door
Cassette
Insertion Slot
Erase Button
Exhaust Outlet
Intake Vent
Power Supply
Circuit Breaker
USB Cover Left Door
Intake Vent
Number Name Function Reference
Top Door
This can be opened to unjam a plate, or forcibly remove a
loaded cassette .
“5 .2 Dealing with Plate
Jams”(p . 54)
“5 .3 Forcibly Removing
the Cassette”(p . 61)
Cassette Insertion Slot The cassette is inserted here .
“3 .2 Image Erase
Operation”(p . 30)
“3 .3 Image Read
Operation”(p . 32)
Status Lamp Indicates device status and errors . “2 .3 Status Lamp”(p . 25)
Erase Button Pressing this button will erase image data from the plate .
“3 .2 Image Erase
Operation”(p . 30)
Exhaust Outlet Air is emitted through here from the inside to keep it cool . “6.2.3 Intake Vent, Ex -
haust Outlet Cleaning”(p .
65)
Intake Vent Takes in air from the outside to keep the inside cool .
Power Supply Circuit
Breaker
Turns the device power ON/OFF .
CAUTION
• Do not turn the power OFF during operation except in
case of an emergency .
“3 .1 Power ON”(p . 28)
“3 .4 Power OFF”(p . 34)
USB Cover
Removing the cover reveals a USB port for connecting the Im-
age processing controller and USB cable (included) .
-
Left Door
This can be opened to unjam the plate, or to clean light collec -
tion unit .
-
Light Collection unit
Cleaning Handle
Used to clean light collection unit .
“6 .2 .4 Light Collection Unit
Cleaning (Keeping Them
Dust Free)”(p . 65)
Unjamming Dial Used to unjam the plate.
“5 .2 Dealing with Plate
Jams”(p . 54)