E-1
INSTALLATION MANUAL
A04E955034
PK-511
Punch Kit
I. Accessory parts
II. Preliminary Preparation
1. Turn the machine’s Sub and Main switches OFF,
and unplug the power cord.
2. Remove the finisher if there is one mounted to
the machine.
III. Installation procedures
1. Open the front door of the Finisher.
2. Remove the control board cover. (1 screw)
3. Remove the guide plate. (2 screws)
4. Insert the two of the control board support/1 into
the back side, and insert two into the front side.
Insert the two of the control board support/2 into
the central area of the front side.
No.
Name
Shape
Q’ty
1. Punch Kit
15KJIXC001SA
1
2. Punch waste
box
15KNIXC002SA
1
3. Control board
A04EIXC001SA
1
4. Control board
support /1
15KNIXC004SA
4
5. Control board
support /2
15KJIXC003SA
2
6. Sensor
assembly wire
bundle
15KJIXC004SA
1
7. TP screw
M4x6
4
8. TP screw
M3x6
2
9. Installation
manual
1
Control board
cover
Guide plate
15KNIXE001SB
15KJIXE001SA
Control board
support /1
Control board
support /1
Control board
support /2
Applied Machines: FS-520/FS-607
