Konica Minolta magicolor 1600W, Service Manual

Page: 90 / 216

Field Service V er. 1.0 Nov. 200 8
9. Remote panel utility (Only for magicolor 1600W)
53
magicolor 1600W magicolor 1650EN
Adjustment / Setting
9. Remote panel utility (Only for magicolor 1600W)
• The Remote Panel Utility shows information about the current status of the printer and
allows you to specify various settings.
NOTE
• In order to use the Remote Panel Utility, install it after installing the printer driver.
9.1 Opening
1. Connect the PC with user machine.
2. Double-click the Remote Panel Utility icon that appears in the notification area.
NOTE
• The Remote Panel Utility can be used when the printer is connected to a computer
and both machines are turned on.
9.2 Panel tab
9.2.1 Remote Panel
Display Content
Status Allows the current status of the printer to be checked.
Display Configuration Page
Displays the configuration page. In addition, the contents of the configu-
ration page can be saved as an INI file.
T/C Change
Click the button to switch the printer to the selected operation mode. The
following two modes are available.
• Change Toner:
Used when replacing a toner cartridge. Select this mode, and then
click the T/C Change button to switch the printer to the Change Toner
mode.
• Eject All Toner:
To remove all toner cartridges.
Image Refresh
• When faint lines occur at a pitch of 24 mm in the main scanning direc-
tion, aging of the toner cartridge is performed to help make the faint
lines less noticeable.
NOTE
• Execution of the image refresh mode consumes toner.
• This function does not help uneven density at a pitch of 25 mm.